| Engine
Modifications |
||
| Porting | $
|
250.00
|
| Boyesen Rad Valve (tr, 04-0167) | $ |
179.95 |
| “Service Honda Racing “Billet ignition cover (Fits CR500 84-03) | $
|
89.00 |
| “Honda Racing” Billet clutch cover (Fits CR500 & CR250 87-03) | $
|
125.00
|
 Our
clutch and ignition covers, as well as our rear disk brake guard
(pictured in the following pages), are CNC machined from 6061 T-6
billet aluminum and are the highest quality available anywhere.
Unlike other aftermarket engine covers these covers are domed, the
bolt mounting flanges use full radiuses and machined to use the
stock Honda flat rubber seal, no cheesy paper gaskets.
|
||
| |
||
| Suspension
Modifications
|
||
| MX
-Tech and Service Honda have joined forces to bring you the finest
suspension for your CR500AF. We have thoroughly tested and specifically
tuned our suspension to your CR500AF. When you order your
suspension with your bike, we take care of everything. Your bike
comes with the suspension installed on the bike, all you do is set
the sag and you are ready to ride. |
||
| Revalve front and rear with new springs, pistons, valving and oil tailored to your weight, ability, and riding conditions. | $ |
775.00 |
| Revalve front and rear with new springs, pistons, valving and oil tailored to your weight, ability, and riding conditions with Enzo fork subtanks | $ |
1200.00
|
| Also available is shortening of the suspension for shorter riders or for dirt track or super motard use, this includes springs and valving. | $ |
900.00
|
| The
Enzo fork subtank system attaches to the fork and acts as a secondary
tunable air volume. It has a special valve in the tank that allows
the forks to act like they have a very low oil level on low speed
or small suspension movements. When the fork moves more rapidly
or uses more travel the subtank and the fork reacts as if it has
a high oil level. What this results in is a fork that is much more
plush on initial travel, yet has much better bottoming resistance. |
||
| |
||
| The
Ultimate Speedometer
|
||
|
With Water Temp. |
$
$
|
159.00
169.00 |
| |
||
| UFO
Plastic
|
||
| Front fender | $ |
17.95
|
| Rear Fender | $ |
29.60 |
| Radiator Shrouds | $ |
51.13 |
| Side panels | $ |
51.13 |
| Front number plate | $ |
21.53 |
| Front disc cover | $ |
21.95 |
| Fork slider | $ |
34.45 |
| Rear shock mud guard | $ |
12.82 |
| |
||
| Handlebars
|
||
| Universal Engineering Solex bar (CR High 5000-00-01) | $ |
89.95 |
| Universal Engineering Deuce bar (CR High 6000-00-01) | $ |
74.95 |
| ProTaper (CR High gold 02-4732, silver 02-4746, black 02-4772) | $ |
89.95 |
| Built rubber mount clamp kit for oversized bars (Gray S1024-006G, Red S1024-006R, Gray 10 mm taller S1024-016G, Red 10 mm taller S1024-016R) | $ |
49.95
|
| Handlebar Change Labor | $ |
70.00 |
| |
||
| Grips
|
||
| Pro Taper Half Waffle (black 02-4795) | $ |
7.95 |
| Pro Taper Full Waffle (black 02-4790) | $ |
7.95
|
| |
||
Steering
Dampers
|
||
| Scotts Regular Mount Damper Kit with Damper,ProTaper Bars, and Top Triple clamp. sct, | $ |
699.95 |
| Scotts Sub Mount Damper Kit (Requires seperate purchase of O.S. bars.) | $ |
529.95 |
| Scotts Regular Mount Steering Damper Kit. | $ |
469.95 |
| GPR Steering Damper Sub Mount Kit. (Requires seperate purchase of O.S. bars.) red afx = tr,20-0688, black afx = tr,20-0687, red af = tr, 20-0686, black af = 20-0685 | $ |
449.99 |
| GPR Steering Damper Kit, Regular Mount for O.S. Bars (Requires seperate purchase of O.S. bars.) red afx = tr,20-0767, black afx = tr, 20-0766, red af = 20-0765, black af = 20-0764. | $ |
400.00 |
| GPR Steering Damper Kit, Regular Mount for Std Bars red afx = tr, 20-0733, black afx = tr, 20-0732, red af =20-0731, black af = 20-0730 | $ |
375.00 |
| Steering damper installation | $ |
105.00 |
| |
||
Hydraulic
Clutch
|
||
| Magura hydraulic clutch system (M0120493) | $ |
249.95 |
| Hydraulic clutch installation | $ |
70.00 |
| |
||
Graphic
Kits
|
||
| Replacement 2006 CR500AFX Graphics | $ |
59.95
|
| |
||
| Chain
and Sprockets
|
||
| Afam counter shaft sprocket (13t 90-0328,14t 90-0329, 15t 90-0330) | $ |
22.99 |
| Afam rear sprocket (47t 90-0224, 48t 90-0225, 49t 90-0226, 50t 90-0227, 51t 90-0228, 52t 90-0229, 53t 90-0230) | $ |
61.49 |
| D.I.D ERT gold mx racing chain (non-“o” ring) (hl,520ert-120l) | $ |
88.22 |
| D.I.D ERV2 gold off road “x” ring racing chain (hl,520erv2-120l) | $ |
194.76 |
| |
||
|
Skid Plates
|
||
| Works Connection skid plate (34-0833) glide plate style. | $ |
69.95 |
| Works Connection skid plate installation | $ |
35.00 |
| Works Connection case guard (weld on, works with glide plate) | $ |
64.95 |
| Works Connection case guard installation. | $ |
35.00 |
Works Connection full skid plate. wrks, 10-077 |
$ |
199.99 |
| Works Connection full skid plate installation. | $ |
70.00 |
| E-Line carbon fiber+kevlar skid plate has wings for additional protection | $ |
159.99 |
| E-Line carbon fiber+kevlar skid plate installation | $ |
70.00 |
| |
||
| Triple
Clamps
|
||
| Built Upper | $ |
159.95 |
| Built Lower | $ |
229.95 |
| Universal Engineering Radius triple clamps (black ) | $ |
375.00 |
| |
||
| Exhaust
|
||
| Carbon Fiber pipe guard | $ |
149.95 |
| Pro Circuit spark arrestor (instead of factory sound silencer) | $ |
55.00 |
| Replacement Pro Circuit or FMF pipe | $ |
229.00
|
| Replacement Pro Circuit or FMF silencer | $ |
119.00 |
| Replacement Pro Circuit or FMF spark arrestor | $ |
159.00 |
| FMF “Q” series spark arrestor | $ |
159.00 |
| |
||
| Wheels
and Hubs
|
||
| Service Honda billet rear disk guard and rear caliper mount.Makes wheel changes easy and protects the rotor much better. Production parts will be anodized red or black with a machined wing highlight. | $ |
125.00
|
| Excel
Pro Series wheel sets (gold/gold, gold/black) Includes Spline drive spoke nipples,carrier ring set and assembly. |
$ |
Starting
at 1000. 00 |
| Excel Rims with Talon Hub wheel sets. Complete | Starting
at 1200 .00 |
|
| Excel front rim (gold, black, red, silver) | $ |
153.48 |
| Excel rear rim (gold, black, red, silver) | $ |
168.48 |
| Nipple set (front) | $ |
19.78
|
| Nipple set (rear) | $ |
38.75
|
| spoke set (one set per wheel required) | $ |
84.00 |
| (Wheel
modifications will incur a $120.00 per wheel labor charge) (Tire only modifications will incur a $35.00 per tire labor charge) |
||
| |
||
| |
||
| Fuel
Tanks
|
||
| Clark 3.0 gallon fuel tank | $ |
230.00 |
| Ims 4.0 gallon fuel tank, replaces radiator shrouds. (Ims, 212234-N1) | $ |
390.00 |
| All tanks are substantially modified for proper fit. (Sub frame bolts need to be checked for clearance on both above tanks. This issue also exists with the CR125 and CR250) | ||
| |
||
| Cooling
|
||
| Cooling Fan Kit (Installed when ordered with bike, requires optional ignition system) | $ |
273.40 |
| |
||
