Suspension Modifications
MX -Tech and Service Honda have joined forces to bring you the finest suspension for your Junior-X. We have thoroughly tested and specifically tuned our suspension to your Junior-X.  When you order your suspension with your bike, we take care of everything. Your bike comes with the suspension installed on the bike, all you do is set the sag and you are ready to ride.
Revalve front and rear with new springs, pistons, valving and oil tailored to your weight, ability, and riding conditions.
$
750.00
Revalve front and rear with new springs, pistons, valving and oil tailored to your weight, ability, and riding conditions with Enzo fork subtanks    
$
1100.00
The Enzo fork subtank system attaches to the fork and acts as a secondary tunable air volume. It has a special valve in the tank that allows the forks to act like they have a very low oil level on low speed or small suspension movements. When the fork moves more rapidly or uses more travel the subtank and the fork reacts as if it has a high oil level. What this results in is a fork that is much more plush on initial travel, yet has much better bottoming resistance.
Handlebars
Universal Engineering Deuce bar (Mini High 6004-00-01)
$
74.95
ProTaper SE bar (Honda Mini Silver 02-5236 Black 02-5258 Gray 02-5280)
$
89.95
Handlebar Change Labor
$
70.00
 
Skid Plates

Works Connection skid plate (tr 34-1452) skid plate

$
69.95
Works Connection skid plate installation
$
70.00
Grips
Pro Taper Half Waffle (black 02-4795)
$
7.95
Pro Taper Full Waffle (black 02-4790)
$
7.95
Steering Dampers
Scotts Regular Mount Damper Kit with Damper,ProTaper Bars, and Top Triple clamp. sct,
$
659.00
Scotts Regular Mount Steering Damper Kit.
$
469.95
Steering damper installation
$
105.00
Clutch
Rekluse Auto Clutch rms116
$
449.00
Auto Clutch installation and setup
$
105.00
Graphic Kits
Replacement Graphics  
$
69.95
Wheels and Hubs
Complete Small Wheel Kit 17" front and 14" rear includes tires and installation.  
$795.44
Front wheel Assembly 17” (rim, spokes and hub with bearings assembled) 44650-GBF-860
Front tire 17” 44711-GS2-701
Front Tube 17” 44712-GS2-701
Front Rim Strip 17” 44713-GS2-701

Rear Wheel Assembly 14” (rim, spokes and hub with bearings assembled) 42650-GBF-830
Rear Tire 14” 42711-GS2-861
Rear Tube 14” 42712-GS2-701
Rear Rim Strip 14” 42713-GS2-701
Labor 1.0 hr.

   
(Other Wheel modifications will incur a $120.00 per wheel labor charge)
(Tire only modifications will incur a $35.00 per tire labor charge)